IN[FOCUS]

Hi IN[FOCUS] Readers,

Well, Corbin and I hope part 1 of this series has helped you prepare for your Perfect Super 8mm Highlight, and that you’re now ready to learn some of our day-of-strategies that help us obtain that perfect Super 8mm Highlight (or at least get as close as possible, lets face it, rarely does wedding filming reach perfection).

Here I am describing the shots we choose, and why we choose them:

And now what you’ve been waiting for, a shot list for The Perfect Super 8mm Highlight: (all ceremonies and receptions are different, so this may not be the perfect list for every wedding highlight)

• establishing shots of the ceremony location (remember you’ll want a still shot over which to put the bride’s and groom’s name)
• detail in the bride’s room to establish it (her bouquet is always a good choice)
• the bride smiling and/or laughing
• a wide shot of all the bridesmaids
• establishing your groom (maybe entering his room if possible)
• detail of the groom’s room (jacket hanging up)
• a wide of all the groomsmen
• the groom smiling and/or laughing
• establish the ceremony location (a wide of it with no guests or a shot of the program)
• 3-4 ceremony detail shots (you’ll use these as cutaways during the ceremony, so be sure to shoot mids or close shots)
• guests mingling and greeting one another
• the groom walking into place for the ceremony
• groom’s smiling (remember to get it in-between the bridesmaids coming down)
• a wide of entire wedding party in place (not shown in film)
• the bride’s entrance (remember to try and get 2-3 shots of her entrance)
• the bride’s father giving her away
• unity candle or any other unique ceremony event
• vows and/or ring shots
• the kiss
• the couples exit
• 1-3 shots of couple right after ceremony as they look at their rings.
• reception establishing shot
• 2-3 reception detail shots (we no longer film the cakes, since we show them during the cake cutting)
• the couple’s reception entrance (only film the bride and groom’s entrance and not their entire wedding party)
• 2-4 shots of the couple’s First Dance (the groom twirling his bride is always a good shot, as is the dip and/or kiss at the end)
• 2-3 shots of the Father/Daughter Dance
• 2-3 shots of the Mother/Son Dance (the beginning and ends of the dances seem to be the best moments)
• cake cutting (again, all receptions are different, so just do your best to get all the major moments)
• family members and wedding party dancing (do your best to get both sets of parents and grandparents)
• bride and groom dancing
• anything unique to the bride and groom’s reception (photo booth, candy bar, etc…)
• bouquet and garter toss
• the couple’s Last Dance and/or exit

Corbin and I hope this helps you create the Perfect Super 8mm Highlight and look forward to seeing your films!

Happy filming,

-Dave

Dave and Corbin Baxter

More Posts

Christina and Clay’s Super 8mm Wedding Highlight from Soulbox Productions on Vimeo.

Hi IN[FOCUS] Readers,

This is Dave with Soulbox Productions. Corbin and I have been producing Super 8mm Wedding Highlights for the past 4 years and we want to share with you what we’ve learned in this two part series.

So you just purchased your refurbished super 8mm camera from Du-All Camera and you’re ready to film a wedding, right?…not so fast.

First, you’ll need to make sure you and your camera are ready to go.

Let’s start with the film, since you’ll need some to test your camera. Shooting at 24fps, each cartridge has 3 minutes of footage. We film a highlight using 3 cartridges, but your first time out, you’ll most likely want to use 4. If the Pre-Ceremony and Ceremony are well lit, buy two 200 speed cartridges (one for each – but you can always get two 500 speed and be ok). And assuming the Reception will be in low light, buy two 500 speed cartridges for it. We buy film from our processing company Spectra Film & Video. The price of their 4 pack of film (with processing included) is $259.

If you want to be confident of your camera’s workability on your client’s wedding day, you’ll want to do some tests at home first:

• you’ll need an extra cartridge of 200 speed film
• check to make sure there are no hairs are dust particles where you insert the cartridge (use a toothpick to gently remove any unwanted hairs)
• use measuring tape and measure out 5 feet and place the meter on your camera at 5 and begin filming
• we always like to test our cameras both by their meters and by our eyes to make sure both techniques are in focus (make notes as you test your camera, you don’t want to forget which technique you were trying when your test footage comes back from the lab in a few months)
• don’t forget to test both outside in bright light and at night for low lighting situations (see our post on an inexpensive super 8mm lighting trick)

There is a way around the extra costs and time by doing a home test. You can simply jump right into filming with super 8mm. For Corbin and me, it just so happened that one of our friends was getting married, so we surprised her with the super 8mm highlight. Don’t have a friend getting married anytime soon? Simply ask one of your upcoming clients. However, I would be very cautious about charging a lot (or anything at all) when testing an unproven camera.

Below is our first attempt at a Super 8mm Highlight, testing our camera for our good friends Mike and Misty (please note that Spectra Film & Video did not do the processing).

Misty and Mike’s Super 8mm Wedding Highlight from Soulbox Productions on Vimeo.

Okay, so the footage came back and the camera is ready to go! Well, besides your camera and film, here’s what else you’ll need for your first shoot:

• a bag
• batteries for the camera (and extra batteries)
• a light (unless everything is outside, but even then, it might get rained back inside)
• a belt clip (so you have easy access to the next three items)
• a lens wipe
• a marker (to number your cartridges, so your processing company will give the footage back to you in order, this saves time in post production)
• a small flashlight (so that you can read how much footage you have left during a dark reception)

Corbin and I hope this helps you get ready for your first Super 8mm Highlight. Next up in Part II, a shot list that will help you perfect the Super 8mm Highlight.

Cheers,
Dave and Corb

Dave and Corbin Baxter

More Posts

DP Slider offers a camera dolly system that is smooth to operate and simple to setup.  Designed with roller bearings, the linear motion of DP Slider is ultra smooth.  In addition, the carriage guide is made of aluminum channel to provide a light weight yet sturdy system.  DP Slider can be used on table tops or directly on the ground.  It can be mounted on a single tripod or light stands.  It can be orientated on an angle, upside down or even sideways and it will always slide smoothly.  In addition, a unique feature of DP Slider “V” Series is its ability to provide VERTICAL slide to emulate crane motion.

infocus

More Posts